Bike Mudguards for the Dutch Winter: Full-Length, Clip-On and How to Fit Them
Affiliate links: this guide links to retailers. If you buy through one of these links, we may earn a small commission at no extra cost to you. It never changes what we recommend.
Quick picks
Chosen from manufacturer specs and published sources. We haven't tested these ourselves. How we choose →
- See prices at bol.com
Good for City bikes on 28-inch wheels with eyelets
SKS BLUEMELS STRIPES 28" SET
Aluminum strips embedded in plastic, V-stays with fixed bridges, and ASR stays that release if a branch jams the wheel.
- See prices at bol.com
Good for Riders who want aluminum guards for 28 to 29 inch wheels
SKS EDGE AL SET
Aluminum, stays included, mounted at three points, offered in 46, 56, 66 and 76 mm profile widths.
Also worth a look: SKS RACEBLADE PRO XL SET, good for road or gravel bikes without mudguard eyelets
Before you order: check your wheel size and whether your frame has mounting eyelets; without eyelets, look at clip-on guards.
Links open the retailer's search results in a new tab. Most Dutch shops are in Dutch, so we fill in the search for you.
Wet roads throw a stripe of grit up your back when a bike has no mudguards, and the same spray lands on your chain and brakes. Below: which type to choose, how to match a guard to your tyre and what to check when you fit it.
Why do you need mudguards in a Dutch winter?
Mudguards stop the wheel from throwing road water up at you, and they keep grit and salt off your drivetrain. ANWB warns that brine causes corrosion on many metals, including steel and aluminum, and advises cleaning the bike after rides through brine and snow. A guard that covers the wheel closely should catch much of that spray before it reaches your chain and brakes.
There is a comfort case too. Dry trousers on arrival matter when you cycle in office clothes, and a rain jacket does less when your legs and back are splashed from below. Pair guards with the right rain gear and a bag that copes with the rest.
Full-length or clip-on mudguards?
If your frame and fork have mounting eyelets, choose full-length mudguards on stays. They cover more of the wheel, sit more rigidly and, in our reasoning, last longer under daily use. Clip-on guards make sense for bikes without eyelets, like many road bikes, or for riders who want to remove them on dry days.
| Full-length on stays | Clip-on / quick-release | |
|---|---|---|
| Needs mounting eyelets | Yes | No |
| Fitting | Bolted to the frame and fork with stays | Quick-release fittings |
| Easy to remove for dry days | Not really | Yes |
| Typical bike | Commuter and city bikes | Road and gravel bikes |
The SKS Raceblade Pro XL shows the clip-on idea: quick-release fitting, listed for 25 to 32 mm tyres on 28-inch wheels. SKS also notes that on disc-brake bikes you should check the brake cable routing before fitting.
How do you match mudguard width to your tyre?
Read the size on your tyre sidewall, such as 40‑622. The first number is the tyre width in millimeters. SKS says a mudguard should be at least 3 mm wider than the tyre on each side, and that a gap of about 1.5 cm between tyre and guard is right.
SKS lists its guards by profile width and the tyre range each width suits. For the Edge AL set, the 46 mm profile is listed for tyres of about 28 to 40 mm and the 56 mm profile for about 38 to 50 mm. The Bluemels Stripes 28" set is listed with maximum tyre widths of 45, 55, 65 and 69 mm. A winter tyre is often wider than a summer tyre, so measure before you buy. Our winter tyre guide explains how to read tyre sizes.
If you plan to switch to studded tyres, buy mudguards that clear the studded tyre, not only the one on the bike today.
What do mudflaps add?
A mudflap, or spoiler, is the soft strip at the end of the guard. A longer rear flap shields the person behind you, and a longer front flap keeps spray off your shoes and the front chainring. SKS notes that soft-plastic spoilers can double as edge protectors. Not every set includes them, so check the product page.
How do you fit mudguards so they do not rattle?
Fit and tighten in order. Most rattles trace to one loose connection.
- Check the frame and fork have mounting eyelets at the dropouts and at the fork crown and seat-stay bridge. If not, pick a clip-on type.
- Fit the guard loosely, centered over the tyre, with the stays attached to the eyelets.
- Turn the wheel and look for even gaps on both sides and at the top. Aim for about 1.5 cm.
- Tighten the stay bolts and the center bridge one at a time, and spin the wheel again.
- Bend the stays gently if one side touches. Do not force a stay that does not reach.
- Ride a short loop over cobbles or tiles, listening for any tick, and retighten what you find.
Some stays are built to release. SKS's Bluemels guards use ASR stays that uncouple when a branch jams between the spokes. If a stay pops out, clip it back in before riding on.
SKS sells replacement stays for its Bluemels guards so a bent stay does not mean a new set. Our seasonal prep checklist puts mudguards on the list for the first cold week.
What are mudguards made of, and does it matter?
SKS makes its city mudguards in more than one construction. The Bluemels sets use a sandwich of fine aluminum strips embedded in plastic, which SKS describes as robust, rigid and corrosion-resistant. The Edge AL is aluminum.
In a salted winter, corrosion resistance is the property to look for, and that is also why you should rinse the bike after gritted roads. For a bike you ride daily, a stiffer guard holds its shape better over bumps, which cuts down on rubbing.
How do you look after mudguards in winter?
Rinse and wipe them with the rest of the bike. ANWB advises cleaning the bike regularly with a mild soapy solution and says not to use a high-pressure washer, because it blasts away protective grease and pushes water into places it should not go. After a ride through brine or snow, clean the bike again, stays and bolts included.
Look at the stay bolts every few weeks. Vibration on cobbles loosens them, and a loose bolt is the usual start of a rattle. If you wipe the chain at the same time, you are already doing half of a winter bike service.
Which mudguards are worth a look?
Start with your bike. If it has eyelets and 28-inch wheels, the SKS Bluemels Stripes and Edge AL sets are lines SKS lists for 28-inch city and trekking use. For a bike with no eyelets, the Raceblade Pro XL is a quick-release option for narrower tyres.
You can browse full-length mudguards for 28-inch bikes at Dutch shops, or look at clip-on mudguards if your frame has no eyelets. Check each product page for the tyre-width range before ordering.
Mudguards are the "dry" in Visible. Dry. Warm. The complete winter cycling guide shows where they fit, and the winter cycling kit orders them against lights, tyres and clothing for a first budget.
Frequently asked questions
Do I need mudguards for winter cycling in the Netherlands?
There is little reason to skip them. Wet roads throw water and grit up your back and onto your chain, and ANWB warns that road brine corrodes steel and aluminum parts. Mudguards keep your legs and bag drier, and they should shield the drivetrain from some of that spray.
How wide should my mudguards be?
SKS says a mudguard should be wider than the tyre by at least 3 mm on each side. Check the width printed on your tyre sidewall (for example 40-622 means 40 mm wide), then pick a guard whose listed tyre range includes that number with room to spare.
What gap should there be between tyre and mudguard?
SKS gives about 1.5 cm between tyre and mudguard as the target. Too little and mud or a pebble jams the wheel, too much and spray escapes. Check clearance at the fork crown, the chainstays and the brake bridge, because that is where tight spots usually appear.
Are clip-on mudguards good enough for winter?
They help on a bike with no eyelets, such as a road bike, and they come off for dry days. Full-length guards on stays cover more of the wheel and, in our view, hold up better to daily commuting. The SKS Raceblade Pro XL is a quick-release example for 25 to 32 mm tyres.
Do mudguards fit over wider winter tyres?
Only if the frame and fork have the clearance. A wider tyre needs a wider guard, and the guard still needs about 1.5 cm of gap per SKS. Measure with the actual tyre installed, and read the tyre-width range on the mudguard's product page before ordering.
How do I stop mudguards rattling?
Rattle usually comes from a loose bolt or a stay that touches the guard. Tighten each connection, make sure the guard sits centered on the tyre and check that no stay rubs the fender. Replace bent stays instead of forcing them. SKS sells replacement stays for its Bluemels guards.